News: 5V-24 1-4CH Flip-Flop Relay Module Bistable Self-locking Trigger Time Switch Turn on/off PLC Board SL35B04
Packing list:
1 pcs1/2/4 Channel DC 5V/12V BistableSelf-locking Relay Module
Please select the version you need
Description:
1 Channel DC 5V Self-locking Relay Module(version 1) :
Working voltage: DC 5V
Working current: 62-70MA
Standby current: 0.1mA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 35mm * 16mm * 18.5mm (L * W * H), Very small size
Weight: 12.5 g
1 Channel DC 12V Self-locking Relay Module(version 2) :
Working voltage: DC 6-24V(Recommended DC 9V 12V)
Working current: 61-70MA
Standby current: 0.12mA
Load current : AC 250V/10A, DC 30V/10A
Trigger mode: Low pulse trigger
Size: 48mm * 16mm * 18.5mm (L * W * H), Very small size
Weight: 14 g
2 Channel DC 5V Self-locking Relay Module(version 3) :
Working voltage: DC 5V
Working current: 1 relay 70MA;2 relay 140MA;
Standby current: 0.2mA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 36mm * 32.3mm * 18.5mm (L * W * H)
Weight: 24.5 g
2 Channel DC 12V Self-locking Relay Module(version 4) :
Working voltage: DC 6-24V(Recommended DC 9V 12V)
Working current: 1 relay 70MA;2 relay 140MA;
Standby current: 0.25mA
Load current : AC 250V/10A, DC 30V/10A
Trigger mode: Low pulse trigger
Size: 48mm * 32.3mm * 18.5mm (L * W * H), Very small size
Weight: 27.6 g
4 Channel DC 5V Self-locking Relay Module(version 5) :
Working voltage: DC 5V
Working current: 1 relay 70MA;2 relay 140MA;3 relay 210MA;4 relay 280MA
Standby current: 0.41mA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 65mm * 42mm * 18.5mm (L * W * H)
Weight: 52.4 g
4 Channel DC 12V Self-locking Relay Module(version 6) :
Working voltage: DC 6-24V(Recommended DC 9V 12V 24V)
Working current: 1 relay 37MA;2 relay 73 MA; 3 relay 1 10MA; 4 relay 146 MA
Standby current: 2mA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 65mm * 47mm * 18.5mm (L * W * H)
Weight: 56.8g
USE 1:
By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.
USE 2:
By default, the relay is release, MCU output low-pulse(0.3-1seconds), the relay pull, low-pulse again, the relay release, the
third low-pulse, the relay pull, and so on.
Module interface:
1. V: positive power supply (VCC)
2. G: negative power supply (GND)
3. T (T1/T2/T3/T4): Low pulse trigger
Relay outputs:
1. NO: normally open relay interface
2. COM: Common Interface Relays
3. NC: normally closed relay interface
USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on
Typical applications:
Automotive electronics
Motor/PLC/LED
Smart Home/Home automation
Emergency lighting
MCU development board
Toy car
UNO MEGA2560 raspberry pi
diy electronic kit
