News: RS485 I2C CAN 1-Wire BUS Hub Splitter Master-Slave Ring Network Wiring For ESP32 Remote IO PV Inverter PLC HMI PTZ Printer LED SPLIA12

SPLIA12 is a 2-wire multi-function splitter designed and produced by eletechsup. This board can be used to easily connect multiple electrical devices or bus devices.



Specification:

10Amp DC 1-100V AC 85-265V 2x10 position screw terminal block distribution module. Support for multiple module extension connections.

Rated current 10Amp(total input or output), Maximum voltage DC 100V/AC 265V.

A / B terminal blocks, Pitch 5mm/0.197'', Wire range 22AWG ~ 12AWG / 2.5mm square. Rated current 10Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.



Function:

Voltage: DC 1-100V /AC 85-265V

Current: 0-10A

Branch port: 1 input, 11 output, multiple cascade expansion output terminals are available

Wiring terminal: KF128-5.0

Wire Range: AWG22-12

Size: 59*50*18MM (Only Board), 66*53*31MM (With DIN Shell)

Weight: 37g (Only Board), 62g (With DIN Shell)





Advantage:

1 Only routing on the bottom layer of PCB to ensure electrical safety

2 With DIN housing, it can be easily embedded in the cabinet



Typical Applications:

Used for power distribution within 10A.

Load: Lights, LEDs, refrigerators, air conditioners, motors, and other household appliances



Used for two-wire bus branching within 10M, such as: RS485 I2C CAN 1-Wire

With guide rail slot, can be installed in the chassis with standard guide rail